Stick Vacuums
Shark Rocket Pro HV371 Corded Stick Vacuum
Why choose it
Choose the Shark Rocket Pro HV371 for LED headlights and a removable hand vacuum, with crevice, upholstery and dusting tools included.1
The details
Specifications
Core specifications4
| Cleaning arrangement | The Shark® Rocket® Pro ultra-lightweight corded stick vacuum cleans hardwood floors and deep-cleans carpets, and easily converts to a hand vacuum to handle above-floor messes. It features Advanced Swivel Steering, LED headlights to reveal debris, and an XL-capacity dust cup.1 |
|---|---|
| Suitable surfaces | DO NOT use in the following areas: a) Poorly lit areas b) Wet or damp surfaces c) Outdoor areas2 |
| Included cleaning tools | In the Box Crevice Tool Upholstery Tool Anti-Allergen Dust Brush1 |
| Brushroll care | CLEANING THE BRUSHROLL To access the brushroll, flip the floor nozzle over and use the edge of a coin to open the three locks on the bottom of the floor nozzle. Run scissors along the groove in the brushroll to cut or clear away any string, carpet fibers, hair, or other debris. To reinstall the cover, line it up, then rotate down until it clicks into place. Use the edge of a coin to close the three locks on the bottom of the nozzle. 1 2 CHECK HANDHELD CHECK FLOOR NOZZLE CHECK WAND sharkclean.com sharkclean.com2 |
Fit and compatibility1
| Power and charging | TECHNICAL SPECIFICATIONS Voltage: 120V~, 60Hz Watts: 500W2 |
|---|
More specifications1
| Filter care | Regularly clean and replace the filters to keep your vacuum's suction power optimal. IMPORTANT: To prevent damage, rinse filters with water ONLY. DO NOT use soap. Allow filters to air-dry for at least 24 hours before reinstalling them to prevent liquid from being drawn into electric parts. Empty the dust cup each time you vacuum and periodically during cleaning, when debris in the dust cup reaches the MAX fill line. MAINTENANCE CLEANING FILTERS IMPORTANT: Unplug the vacuum before performing any maintenance. IMPORTANT: Unplug the vacuum before performing any maintenance. NOTE: The pre-motor filters should be replaced every 2.5 years. The post-motor filter should be replaced every 3 years. PRE-MOTOR FILTERS POST-MOTOR FILTER Replacement Pre-Motor Filter Kit XPMFK320 Replacement Post-Motor Filter 1084FTV320 OR REPLACEMENT FILTERS Empty Dust Cu Releas p e WAND The Pre-Motor Filters should be washed once a month. The Post-Motor Filter should be washed once every year. sharkclean.com sharkclean.com2 |
|---|